Cmore railway and a rear bus

[LazyLab]

Installed a Cmore Railway red dot on a flat rail upper, I want to add some back up sights also but Cmore takes up a lot of real estate on the upper. If I put a Magbul Mbus to the rear it interferes with the CH to much for my liking. Hope I didn't screw up and should of bought the Cmore with the built in rear sight. I don't want to go past the upper and unto the front rail with the Cmore. I know I can get 45 degrees to fit but not really wanting them either. Thinking Troy?

[Malaka]

Troy is pretty much the industry standard. I believe they co witness with the cmore. I've got some if you wanna test the fitment.

[Surfer21]

Is it an eyerelief problem, in other words,do you have to move the Cmore further foward on the upper receiver ?

[LazyLab]

Troy is pretty much the industry standard. I believe they co witness with the cmore. I've got some if you wanna test the fitment.

Thanks for offer! Just found the specs on the Troy DOA sights and they will work.

[LazyLab]

Is it an eyerelief problem, in other words,do you have to move the Cmore further foward on the upper receiver ?

No, more of a function and look issue. The magpuls would interfere with the CH where I wanted it mounted. I do not want to push the dot out further then the upper receiver. The Troy sight will do the job, finally located the measurement of it folded down (wasn't on Troy site 😡).

[BLAMMO!!]

Troy is pretty much the industry standard. I believe they co witness with the cmore. I've got some if you wanna test the fitment.

Yikes!! They're like twice the price of Magul. I don't suppose you want to save me a little money and tell me they're not really worth it.

[Surfer21]

No ,Troys are worth it, but you might want to look at Midwest Industries and also Samson Manufacturing as they have similar ones. If Malaka is referring to the Troy Mini BUIS ,then your stuck w/ them as no one makes an equivalent one to the minis.

[LazyLab]

Thanks guys!